+++ /dev/null
-[authentication]
-# The cleartext password for access to the administrative part. It
-# can only be changed in this file, not via the administrative
-# interface.
-admin_password = admin123
-
-# Which modules to use for authentication. Valid values are 'DB',
-# 'LDAP', 'HTTPHeaders'. You can use multiple modules separated by spaces.
-#
-# Multiple LDAP modules with different configurations can be used by
-# postfixing 'LDAP' with the name of the configuration section to use:
-# 'LDAP:ldap_fallback' would use the data from
-# '[authentication/ldap_fallback]'. The name defaults to 'ldap' if it
-# isn't given.
-#
-# Note that the LDAP module doesn't support changing the password.
-module = DB
-
-# The cookie name can be changed if desired.
-cookie_name = kivitendo_session_id
-
-# The number of minutes a session is valid. The default value is eight
-# hours.
-session_timeout = 480
-
-# The number of seconds to penalize failed login attempts. 0 disables
-# it.
-failed_login_penalty = 5
-
-[authentication/database]
-# Connection information for the database with the user and group
-# inforamtion. This information is always needed, even if LDAP is
-# used for authentication, as the user information is stored in this
-# database while LDAP is only used for password verification.
-#
-# If 'module' is set to 'DB' then this database also contains the
-# users' passwords.
-host = 127.0.0.1
-port = 5432
-db = kivitendo_auth
-user = postgres
-password =
-
-[authentication/ldap]
-# This section is only relevant if 'module' is set to 'LDAP'. It names
-# the LDAP server the passwords are verified against by doing a LDAP
-# bind operation.
-#
-# At least the parameters 'host', 'attribute' and 'base_dn' have to be
-# specified.
-#
-# tls: Activate encryption via TLS
-# verify: If 'tls' is used, how to verify the server's certificate.
-# Can be one of 'require' or 'none'.
-# attribute: Name of the LDAP attribute containing the user's login name
-# base_dn: Base DN the LDAP searches start from
-# filter: An optional LDAP filter specification. The string '<%login%>'
-# is replaced by the user's login name before the search is started.
-# bind_dn and bind_password:
-# If searching the LDAP tree requires user credentials
-# (e.g. ActiveDirectory) then these two parameters specify
-# the user name and password to use.
-# timeout: Timeout when connecting to the server in seconds.
-#
-# You can specify a fallback LDAP server to use in case the main one
-# isn't reachable by duplicating this whole section as
-# "[authentication/ldap_fallback]".
-#
-host = localhost
-port = 389
-tls = 0
-attribute = uid
-base_dn =
-filter =
-bind_dn =
-bind_password =
-timeout = 10
-verify = require
-
-# For use with module 'HTTPHeaders':
-[authentication/http_basic]
-enabled = 1
-
-# For use with module 'HTTPHeaders':
-[authentication/http_headers]
-enabled = 0
-client_id_header = X-Kivitendo-Client-ID
-user_header = Auth-User
-secret_header = X-Kivitendo-App-Secret
-secret = ...
-
-[system]
-# Set language for login and admin forms. Currently "de" (German)
-# and "en" (English, not perfect) are available.
-language = de
-
-# Set stylesheet for login and admin forms. Supported:
-# design40 - default
-stylesheet = design40
-
-# MassPrint Timeout
-# must be less than cgi timeout
-#
-massprint_timeout = 30
-
-# Set default_manager for admin forms. Currently "german"
-# and "swiss" are available.
-default_manager = german
-
-# The memory limits given here determine the maximum process size
-# (vsz, the total amount of memory this process uses including memory
-# swapped out or shared with other processes) or resident set size
-# (rss, the amount of memory not swapped out/shared with other
-# processes). If either limit is reached at the end of the request
-# then the kivitendo process will exit.
-#
-# This only applies for processes under FCGI and the task manager.
-# For CGI configurations the process will be terminated after each request
-# regardless of this setting.
-#
-# Note: this will only terminate processes with too high memory consumption. It
-# is assumed that an external managing service will start new instances. For
-# FCGI this will usually be apache or the wrapper scripts for nginx, for the
-# task server this will have to be the system manager.
-#
-# Numbers can be postfixed with KB, MB, GB. If no number is given or
-# the number is 0 then no checking will be performed.
-memory_limit_rss =
-memory_limit_vsz =
-
-[paths]
-# path to temporary files (must be writeable by the web server)
-userspath = users
-# spool directory for batch printing
-spool = spool
-# templates base directory
-templates = templates
-# Path to the old memberfile (ignored on new installations)
-memberfile = users/members
-# Path to ELSTER geierlein webserver path inside kivitendo
-# (must be inside kivitendo but you can set an ALIAS for apache/oe
-# if set the export to geierlein is enabled
-# geierlein_path = geierlein
-
-#
-# document path for FileSystem FileManagement:
-# (must be reachable read/write but not executable from webserver)
-document_path = /var/www/kivitendo-erp/kivi_documents
-#
-
-[mail_delivery]
-# Delivery method can be 'sendmail' or 'smtp'. For 'method = sendmail' the
-# parameter 'mail_delivery.sendmail' is used as the executable to call. If
-# 'applications.sendmail' still exists (backwards compatibility) then
-# 'applications.sendmail' will be used instead of 'mail_delivery.sendmail'.
-# If method is empty, mail delivery is disabled.
-method = smtp
-# Location of sendmail for 'method = sendmail'
-sendmail = /usr/sbin/sendmail -t<%if myconfig_email%> -f <%myconfig_email%><%end%>
-# Settings for 'method = smtp'. Only set 'port' if your SMTP server
-# runs on a non-standard port (25 for 'security=none' or
-# 'security=tls', 465 for 'security=ssl').
-host = localhost
-#port = 25
-# Security can be 'tls', 'ssl' or 'none'. Unset equals 'none'. This
-# determines whether or not encryption is used and which kind. For
-# 'tls' the module 'Net::SSLGlue' is required; for 'ssl'
-# 'Net::SMTP::SSL' is required and 'none' only uses 'Net::SMTP'.
-security = none
-# Authentication is only used if 'login' is set. You should only use
-# that with 'tls' or 'ssl' encryption.
-login =
-password =
-
-[imap_client]
-enabled = 0
-hostname = localhost
-username =
-password =
-# This folder can be managed with kivitendo through the background jobs
-# CleanUpEmailSubfolders and SyncEmailFolder. Create no subfolder in the
-# base folder by hand. Use / for subfolders.
-base_folder = INBOX
-# Port only needs to be changed if it is not the default port.
-# port = 993
-# If SSL is to be used, then set port to 993 or leave empty
-ssl = 1
-
-# Define a server for a specific email (e.g. info@test.de) with
-# '[sent_emails_in_imap/email/info@test.de]'
-[sent_emails_in_imap]
-enabled = 0
-hostname = localhost
-username =
-password =
-# This folder must exist. Use / for subfolders.
-folder = Sent/Kivitendo
-# Port only needs to be changed if it is not the default port.
-# port = 143
-# If SSL is used, default port is 993
-ssl = 1
-
-[applications]
-# Location of OpenOffice.org/LibreOffice writer
-openofficeorg_writer = lowriter
-# Location of the html2ps binary
-html2ps = html2ps
-# Location of the Ghostscript binary
-ghostscript = gs
-# Location of the program to create PDFs from TeX documents
-latex = latexmk --pdflatex
-# Location of the Python interpreter to use when converting from
-# OpenDocument to PDF. Some distributions compile UNO support only
-# into binaries located in different locations than the main Python
-# binary.
-python_uno = python3
-
-[environment]
-# Add the following paths to the PATH environment variable.
-path = /usr/local/bin:/usr/X11R6/bin:/usr/X11/bin
-# Add the following paths to the PERL5LIB environment variable.
-# "/sw/lib/perl5" is for Mac OS X with Fink's Perl.
-lib = /sw/lib/perl5
-# Add the following paths to the PYTHONPATH environment variable for
-# locating Python modules. Python is used when converting OpenDocument
-# files into PDF files.
-python_uno_path =
-
-[print_templates]
-# If you have LaTeX installed set to 1
-latex = 1
-# Minimal support for Excel print templates
-excel = 0
-# Enable or disable support for OpenDocument print templates
-opendocument = 1
-# Chose whether or not OpenOffice/LibreOffice should remain running after a
-# conversion. If yes then the conversion of subsequent documents will
-# be a bit faster. You need to have Python and the Python UNO bindings
-# (part of OpenOffice/LibreOffice) installed.
-openofficeorg_daemon = 0
-openofficeorg_daemon_port = 2002
-
-[task_server]
-# Set to 1 for debug messages in users/kivitendo-debug.log
-debug = 0
-# Chose a system user the daemon should run under when started as root.
-run_as =
-# Task servers can run on multiple machines. Each needs its own unique
-# ID. If unset, it defaults to the host name. All but one task server
-# must have 'only_run_tasks_for_this_node' set to 1.
-node_id =
-only_run_tasks_for_this_node = 0
-
-[task_server/notify_on_failure]
-# If you want email notifications for failed jobs then set this to a
-# kivitendo user (login) name. The subject can be changed as well.
-send_email_to =
-# The "From:" header for said email.
-email_from = kivitendo Daemon <root@localhost>
-# The subject for said email.
-email_subject = kivitendo Task-Server: Hintergrundjob fehlgeschlagen
-# The template file used for the email's body.
-email_template = templates/design40_webpages/task_server/failure_notification_email.txt
-
-[periodic_invoices]
-# The user name or email address a report about the posted and printed
-# invoices is sent to.
-send_email_to =
-# The "From:" header for said email.
-email_from = kivitendo Daemon <root@localhost>
-# The subject for said email.
-email_subject = Benachrichtigung: automatisch erstellte Rechnungen
-# The template file used for the email's body.
-email_template = templates/design40_webpages/oe/periodic_invoices_email.txt
-# Whether to always send the mail (0), or only if there were errors
-# (1).
-send_for_errors_only = 0
-
-[self_test]
-
-# modules to be tested
-# Add without SL::BackgroundJob::SelfTest:: prefix
-# Separate with space.
-modules = Transactions
-
-# you probably don't want to be spammed with "everything ok" every day. enable
-# this when you add new tests to make sure they run correctly for a few days
-send_email_on_success = 0
-
-# will log into the standard logfile
-log_to_file = 0
-
-# user login (!) to send the email to.
-send_email_to =
-# will be used to send your report mail
-email_from =
-# The subject line for your report mail
-email_subject = kivitendo self test report
-# template. currently txt and html templates are recognized and correctly mime send.
-email_template = templates/mail/self_test/status_mail.txt
-
-[check_below_minimum_stock]
-# The user name or email address a report about the under stock parts is sent
-# to.
-send_email_to =
-# The "From:" header for said email.
-email_from = kivitendo Daemon <root@localhost>
-# The subject for said email.
-email_subject = Benachrichtigung: Artikel unter Mindestbestand
-# The template file used for the email's body.
-email_template = templates/mail/below_minimum_stock/error_email.html
-
-[follow_up_reminder]
-# Email notifications for due follow ups.
-# The "From:" header for said email.
-email_from = kivitendo Daemon <root@localhost>
-# The subject for said email.
-email_subject = kivitendo: fällige Wiedervorlagen
-# The template file used for the email's body.
-# If empty fu/follow_up_reminder_mail.html will be used.
-email_template =
-
-[follow_up_notify]
-# Email notification for new follow ups.
-email_from = kivitendo Daemon <root@localhost>
-email_subject = kivitendo: neue Wiedervorlagen für Sie von <%creator_name%>
-email_template = templates/mail/follow_up_notify/email_body.txt
-
-[secrets]
-# Passphase used to encrypt/decrypt secrets stored in the kivitendo client database.
-# While any length is allowed, it will get stretched into a 256bit AES key - more is better.
-#master_key =
-
-[console]
-# Automatic login will only work if both "client" and "login" are
-# given. "client" can be a client's database ID or its name. "login"
-# is simply a user's login name.
-client =
-login =
-
-# autorun lines will be executed after autologin.
-# be warned that loading huge libraries will noticably lengthen startup time.
-#autorun = require "bin/mozilla/common.pl";
-# = use English qw(-no_match_vars);
-# = use List::Util qw(min max);
-# = sub take { my $max = shift; my $r = ref($_[0]) eq 'ARRAY' ? $_[0] : \@_; return @{$r}[0..List::Util::min($max, scalar(@{$r})) - 1]; }
-
-# location of history file for permanent history
-history_file = users/console_history
-
-# Location of a separate log file for the console. Everything normally written
-# to the kivitendo log will be put here if triggered from the console.
-log_file = users/kivitendo_console_debug.log
-
-[testing]
-
-# Several tests need a database they can alter data in freely. This
-# database will be dropped & created before any other test is run. The
-# following parameters must be given:
-[testing/database]
-host = 127.0.0.1
-port = 5432
-db =
-user = postgres
-password =
-template = template1
-superuser_user = postgres
-superuser_password =
-
-[devel]
-# Several settings related to the development of kivitendo.
-
-# "client" is used by several scripts (e.g. rose_auto_create_model.pl)
-# when they need access to the database. It can be either a client's
-# database ID or its name.
-client =
-
-[debug]
-# Use DBIx::Log4perl for logging DBI calls. The string LXDEBUGFILE
-# will be replaced by the file name configured for $::lxdebug.
-dbix_log4perl = 0
-dbix_log4perl_config = log4perl.logger = FATAL, LOGFILE
- = log4perl.appender.LOGFILE=Log::Log4perl::Appender::File
- = log4perl.appender.LOGFILE.filename=LXDEBUGFILE
- = log4perl.appender.LOGFILE.mode=append
- = log4perl.appender.LOGFILE.Threshold = ERROR
- = log4perl.appender.LOGFILE.layout=PatternLayout
- = log4perl.appender.LOGFILE.layout.ConversionPattern=[%r] %F %L %c - %m%n
- = log4perl.logger.DBIx.Log4perl=DEBUG, A1
- = log4perl.appender.A1=Log::Log4perl::Appender::File
- = log4perl.appender.A1.filename=LXDEBUGFILE
- = log4perl.appender.A1.mode=append
- = log4perl.appender.A1.layout=Log::Log4perl::Layout::PatternLayout
- = log4perl.appender.A1.layout.ConversionPattern=%d %p> %F{1}:%L %M - %m%n
-
-# Activate certain global debug messages. If you want to combine
-# several options then list them separated by spaces.
-#
-# Possible values include:
-# NONE - no debug output (default)
-# INFO
-# DEBUG1
-# DEBUG2
-# QUERY - Dump SQL queries (only in legacy code; see also "dbix_log4perl" above)
-# TRACE - Track function calls and returns
-# BACKTRACE_ON_ERROR - Print a function call backtrace when $form->error() is called
-# REQUEST_TIMER - Log timing of HTTP requests
-# REQUEST - Log each request. Careful! Passwords get filtered, but
-# there may be confidential information being logged here
-# WARN - warnings
-# SHOW_CALLER - include the file name & line number from where a call
-# to "message" or "dump" was called
-# ALL - all possible debug messages
-#
-# DEVEL - sames as "INFO QUERY TRACE BACKTRACE_ON_ERROR REQUEST_TIMER"
-#
-# Example:
-# global_level = TRACE QUERY
-global_level = NONE
-
-# Activate monitoring of the content of $form. If it is active then
-# monitoring can be turned on for certain variables with the
-# following:
-# $form->{"Watchdog::<variable>"} = 1;
-# Monitoring has a performance cost and is therefore deactivated by
-# default.
-watch_form = 0
-
-# If you want to debug the creation of LaTeX files then set this to 1.
-# That way the temporary LaTeX files created during PDF creation are
-# not removed and remain in the "users" directory.
-keep_temp_files = 0
-
-# Restart the FastCGI process if changes to the program or template
-# files have been detected. The restart will occur after the request
-# in which the changes have been detected has completed.
-restart_fcgi_process_on_changes = 0
-
-# The file name where the debug messages are written to.
-file_name = users/kivitendo-debug.log
-
-# If set to 1 then the installation will be kept unlocked even if a
-# database upgrade fails.
-keep_installation_unlocked = 0
-
-# If set to 1 then all resource links (JavaScript, CSS files) output
-# via $::request->{layout}->use_stylesheet() / use_javascript() will
-# be made unique by appending a random GET parameter. This will cause
-# the web browser to always reload the resources.
-auto_reload_resources = 0
-
-# If set to 1 each exception will include a full stack backtrace.
-backtrace_on_die = 0
-
-[cti]
-# If you want phone numbers to be clickable then this must be set to a
-# command that does the actually dialing. Within this command three
-# variables are replaced before it is executed:
-#
-# 1. <%phone_extension%> and <%phone_password%> are taken from the user
-# configuration (changeable in the admin interface).
-# 2. <%number%> is the number to dial. It has already been sanitized
-# and formatted correctly regarding e.g. the international dialing
-# prefix.
-#
-# The following is an example that works with the OpenUC telephony
-# server:
-# dial_command = curl --insecure -X PUT https://<%phone_extension%>:<%phone_password%>@IP.AD.DR.ESS:8443/sipxconfig/rest/my/call/<%number%>
-dial_command =
-# If you need to dial something before the actual number then set
-# external_prefix to it.
-external_prefix = 0
-# The prefix for international calls (numbers starting with +).
-international_dialing_prefix = 00
-# Our own country code
-our_country_code = 49
-
projects / fsit_smgt.git / commitdiff